|
|
Application of modern technologies for the production of spare parts airsoft guns
Král, Ondřej ; Zemčík, Oskar (referee) ; Jaroš, Aleš (advisor)
This bachelor thesis describes design and manufacture of airsoft spare parts. Selected spare parts were hammer and spring holder, which were designed in 3D parametric software Autodesk Inventor 2016. Chosen method to manufacture spare parts, was Fused Modeling Deposition, which is part of Rapid Prototyping technology. The device for producing parts was 3D printer uPrint. The manufacture of silicon mould was based on printed spring holder, which was used for parts manufacture, by casting plastic materiál. Thesis is completed with a technical-economical evaluation, in which it was found that the silicon mould casting is more profitable in the production of more parts.
|
|
|
Precision forging
Berka, Martin ; Peterková, Eva (referee) ; Lidmila, Zdeněk (advisor)
This bachelor´s thesis deals with the technology of precision forging. The thesis describes basic distribution of the forging according to the nature of the material flow and his procedure. After the introductory part this thesis deals with the analysis of the methods of the drop forging with fin groove. The next section contains a description, parameters and methods of precision forging. Technical a economical evaluation of the component technology is as a conclusion of the thesis.
|
|
| |
|
|
Forging oblong forgings
Chudý, Jan ; Štroner, Marek (referee) ; Lidmila, Zdeněk (advisor)
This bachelor´s thesis is focused on design of technological production procedure of front wheel-drive arm of agricultural machine. Material for construction of this part is unalloyed steel 12 060. Part of this thesis is literall study focused on forging. On basis of this study is designed required forged piece, which will be processed by swaging on hammer KHZ 4A. After swaging is needed removal of excess material in form of burr and stencil with trim pressing machine LKOA 200. Swadge is made of alloyed tool steel 19 662. Part of thesis is mechanical drawing documentation and technical-economical assessment.
|
|
|
History of ferrous alloy manufacture at Czech-Moravian Highlands
Kolníková, Eliška ; Kaňa, Václav (referee) ; Šenberger, Jaroslav (advisor)
This thesis deals with the history of steel production focused on the Czech-Moravian Highlands in the 14th – 19th century. The introduction provides a survey of chemical and physical reactions taking place in the steel production. The next chapter focuses on technology of production of raw iron and steel, there are also mentioned raw materials and equipment for their production. The last part deals with the various localities in the Czech-Moravian Highlands in the 14th - 19 century.
|
|
|
Production of holder by solid forming
Špaček, Antonín ; Štroner, Marek (referee) ; Kopřiva, Miloslav (advisor)
The diploma thesis deals with suggestion of low alloy 14220.0, produced by solid forming. This suggestion is based on the size of series that contain 100 000 pieces a year. The essay contains knowledge refering to drop forging technology and comparison with existing technologies. Two suitable variants of production were assessed, these variants are drop forging with hammers and vertical forging press. Both theories were theoretically analised in order to describe given technology. The analysis also contains calculation and suitable machine choice. Drop filling on vertical forging presses was chosen because of forging type. Furthemore forging proposition was treated including production technique. The chosen variant contains calculation, suggestion of a die, machine that was used and suggestion of flash trimming. For suggested technology was chosen vertical press LZK 3150 B. Its producer is Šmeral a.s. Brno. This project also contains technical drawings of the given component, forge, dies and phase of forging.
|
|
|
Production of forging piece "Spanner"
Vávra, Jan ; Kopřiva, Miloslav (referee) ; Novotný, Karel (advisor)
Projects developed within the bachelor's degree in Mechanical Engineering, presented a proposal technology forged wrench - the hot-rolled steel bars 11 523.0. The thesis also compares the past with conventional methods of production and considering the new technological process of manufacturing. Based on the literature studies about fitting and calculations, was chosen to die forging hammer KHZ 2 A (producer ŠMERAL Brno, plant Hronov), with nominal energy of 20 kJ working pressure of 16 MPa and 30 kW electric power.
|
|
|
Forming machines and tools
Stránský, Luboš ; Peterková, Eva (referee) ; Podaný, Kamil (advisor)
The Bachelor thesis provides a brief overview of the various types of machines and tools used in metal forming. The paper discussed today and earlier used types of machines and tools.The basic types of machines are: a mechanical presses, hydraulic presses, hammers and rotary thermoforming machines. For each type are explained principles, characteristics, advantages and disadvantages.
|
|
|
Design of inspection procedure for selected revolver components
Úlehlová, Eva ; Šrámek, Jan (referee) ; Jankových, Róbert (advisor)
The goal of this master’s thesis was design of the inspection procedure for hammer and trigger of the specific revolver model. Thesis was developed in cooperation with the manufacturer of the revolvers. The theoretical part deals with the MSA methodology, which is used to assess acceptability of measurement systems. The practical part describes the current measurement system and performs gage repeatability and reproducibility study. It was confirmed that the current measurement system requires improvement. Subsequently coordinate systems were designed, based on functional features of the hammer and trigger. Automated optical measurements, based on the coordinate systems, were performed. The results from these measurements were again assessed by the gage R&R study. The analysis confirmed improvement of acceptability of the designed measurement systems. Based on these results, it is recommended to apply suggested procedures in practice. Results and recommendations of this master’s thesis can contribute to develop metrology in the company and improve the existing measurement system.
|
|
|
Issues of hammer die forging
Žižka, Jiří ; Štroner, Marek (referee) ; Podaný, Kamil (advisor)
This bachelor thesis deals with issues of hammer die forging which is technology that is mainly used for the production of shaped and height-versatile and rugged forgings with ribs and protrusions. Forgings are made by several blows of the tools which are called dies. Design of forgings is based on drawing documentation. For successful production of the component it is important to choose right forging temperature, parting line, required additions and tolerances. Hammers are machines which work with hit energy, they use kinetic energy for forming the material. Their characteristic features are good climbing of the material and filling deeper chambers in direction of the hit. Several types of hammers are used, for example fall hammer or double acting hammer and more.
|
guest ::
